Welcome to ACMAS TECHNOLOGIES INC.

Salt Spray Chambers are used to perform the Salt Spray Test also known as Fog Test. Salt Spray Test is an accelerated environmental corrosion test in which specimens/metals are exposed either continuously or intermittently to a fine mist of salt-water solution used to evaluate the corrosion resistance of paints, coatings, or electrical connections.

Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Or the Salt Spray test is a standardized test method used to check corrosion resistance of coated samples. Coating provides corrosion resistance to metallic parts made of steel, zamak or brass. In the chamber during the test, the conditions are constantly maintained.


Technical Specification
Temperature range Ambient to 60 degree C
Temperature Accuracy + 1 degree C
Temperature Control Digital programmable temperature controller cum indicator with PT 100 sensor
Material Inside Stainless steel main body grade 316
Outside Powder coated with transparent lid (toughened glass) to observe sample under test
Air regulator Moisture cum oil filter and air regulator ranging from 0 to 30 psi is provided
Pressure gauge Calibrated pressure gauge is provided for measuring inlet pressure
Atomizer Provided for reliable atomizing
   
Panel Panel is provided with the following:
  • Solid State Digital Programmable Temperature indicator cum controllers with auto-cut off facility of the main chamber and the reservoir.
  • Digital Preset Timer with Memory backup and automatic shut off after pre-set duration setting test duration up to 999 Hrs.
  • Mounted Pressure gauge; regulator value and air filter.
Distillation Unit For producing distilled water inhouse (Optional)
pH meter Table top model (Optional)
Fog collection unit To check calibration i.e 1-2 ml/hour
Electrical Requirement Single phase 220 V, 50 Hz 3 KW approx.
Internal Dimension (mm) Volume (ltr)
600 x 450 x 400 108L
900 x 600 x 500 270L
1200 x 850 x 500 480L
1600 x 1000 x 550 800L

Salt Spray Chamber (ATI-198)

Share:
Salt Spray Chamber
  
Construction

Double walled units with outer chamber made up of powder coated mild steel and inner wall of stainless steel Chamber cover; made up of transparent material, this transparent material makes the cover visible so that personnel can easily analyze the tested sample and its spraying situations time to time.

 

Salient features of salt spray test
  • Standardized test method
  •  Short test duration
  • Multi material test
  • Easy to examine
  • Suitable to examine big samples
Salient features of Obromax salt spray chamber
  • Reliable
  • Low maintenance
  • Stainless steel interiors
  • Corrosion resistance
  • PUF insulation
  • RS 232 computer interface (optional)
Applications of salt spray chamber
  • Research and development
  • Metallurgy
  • Galvanization
  • Anodization
  • Lubrication
  • To check the corrosion resistance
Water proof structure; exists between the chamber cover and chamber body and ensures that there is nosalt spray overflow.

Salt solution filter system & non-crystal nozzle; these equipped system ensure the evenly salt spray distribution and freely adjustable settlement.

Controller; high precision PID temperature controller with temperature sensitivity + 1o C. PID controller, a Proportional-Integral-Derivative controller, controls the temperature by decreasing the average power supplied to the heater as the temperature approaches the set point.

Insulation; it’s a process of retardation or the reduction of heat loss or heat gain for energy conservation. Obromax Chamber provides cellular insulation that is through polyurethane foam.

Heating; desired positive temperature is provided through stainless steel sheathed air heaters, these heaters do not affect the test specimen directly as they are placed in conditioning plenum proving indirect heat.

Contact Us

ACMAS TECHNOLOGIES INC.
312 - 313 Vardhman Capital Mall, LSC-10 Gulabi Bagh, Shakti Nagar, Delhi - 110007 (India)

011-23654603

+91 931 10 39044, 8586873344, 8800266589

.

info@acmastechnologies.com acmastechnologies@gmail.com,
Obromax.delhi@gmail.com, acmas.delhi@gmail.com,
info@acmastechnologies.com,
sales@acmastechnologies.com

Pre & Post Sales:  9313971681
Technical Support:  8586873344
Accounts: 011 - 23654603
Enquiry (Quotation):  8800266589

© 2017 Acmas Technologies Inc. All Rights Reserved.